User Manual Q&AAnswer
Jan 19, 2025 - 09:41 PM
To install the LUCIDE 36712 Gilly Floor Reading Lamp, please follow these steps:
1. Before starting the installation, make sure to read and understand the safety instructions provided in the manual.
2. Begin by assembling the lamp. Attach the different parts of the lamp according to the instructions provided in the manual. Make sure all connections are secure.
3. Once the lamp is assembled, find a suitable location for installation. The lamp is designed for indoor use only and should not be installed in humid places or in contact with water or inflammable products.
4. Always respect the minimal distance indicated on the lamp to inflammable products.
5. If you are unsure about the installation process, it is recommended to hire a qualified electrician to perform the installation. They have the necessary expertise to ensure a safe and correct installation.
6. Before starting the installation, always isolate the power by turning off the electricity to the area where the lamp will be installed.
7. Once the power is isolated, proceed with the installation. Make sure to follow the instructions provided in the manual for connecting the lamp to the power supply.
8. If the lamp comes with a cable, ensure that it is not squeezed or damaged by sharp edges during installation.
9. After the lamp is installed, allow it to cool down before touching it, as the temperature of the lamp and bulbs can get very high.
10. Use the correct bulb for the lamp, respecting the type and maximum wattage indicated on the product.
If you have any further questions or need additional assistance, please refer to the manual or contact Lucide NV directly through their website or customer service hotline provided in the manual.
Add New Comment