How do I assemble the BIG-Power-Worker Maxi Digger? (BIG-Power-Worker Maxi Digger User Guide)

Answer

manuals.plus

Jan 19, 2025 - 09:35 PM

To assemble the BIG-Power-Worker Maxi Digger, please follow the instructions provided in the user guide. Here is a step-by-step guide:

1. Ensure that you have all the parts and tools required for assembly.

2. Lay out all the parts and identify them according to the instructions.

3. Start by attaching the front bucket to the main body of the digger. Use the provided screws and tighten them securely.

4. Attach the two support legs to the main body of the digger. Again, use the provided screws and tighten them securely.

5. Attach the seat to the main body of the digger. Align the holes and use the provided screws to secure it in place.

6. Attach the steering wheel to the main body of the digger. Align the holes and use the provided screws to secure it in place.

7. Once all the parts are securely attached, double-check all the screws to ensure they are tightened properly.

8. Apply the stickers to the designated areas on the digger. Before applying the stickers, clean the surface with a household glass cleaner to remove any grease or dust.

9. Allow the stickers to fully adhere for 48 hours before using the digger.

Please note that assembly and disassembly should be carried out by adults, and the digger should only be used under the direct supervision of an adult. Regularly check the fastenings and always wear shoes during use. Also, remember that the carrying capacity is only for one child, and trailers are not suitable for transporting children.

For further assistance or clarification, you can refer to the user guide provided with the product or contact BIG-SPIELWARENFABRIK GmbH & Co. KG, the manufacturer, through the provided contact details.