User Manual Q&AAnswer
Jan 19, 2025 - 09:12 PM
To attach a Sicce SDC-series pump to your Apex controller using the IOTA Task in APEX Fusion, follow these steps:
1. Open APEX Fusion and navigate to your Apex dashboard.
2. Click on the Tasks button (represented by a gear icon).
3. Select the IOTA Task from the list of available tasks.
4. The IOTA Task will present you with a summary of what it does and the basic requirements for attaching an IOTA-compatible pump to the Apex.
5. In Step 2 of the IOTA Task, you will see a list of all compatible pumps that the Apex has discovered on your network and which are not already attached to the Apex.
6. Choose the Syncra SDC pump you want to attach from the list and click the Next button.
7. In Step 3, enter the 4-digit IOTA password for the selected pump. You can find this password in the Sicce CONTROLL app under the IOTA section for the pump.
8. Click the Next button to proceed to Step 4, which summarizes the action to be taken.
9. Click the Send button to finish the IOTA Task and attach the pump to your Apex.
10. Repeat the IOTA Task process for each additional Sicce SDC pump you want to attach to your Apex.
Note: After attaching a Sicce pump to your Apex, do not use the Sicce CONTROLL app to control the pump. Control the pump through the Apex controller instead.
For more detailed information and troubleshooting, refer to the "Attaching a SDC-Series Pump to the Apex" section in the IOTA Control of Sicce Syncra SDC and XStream SDC Pumps with APEX User Guide.
Add New Comment