How do I install the HAVIT Lighting 9 in 1 Tivah Up & Down fixture? (HAVIT Lighting 9 in 1 Tivah Down fixture Instruction Manual)

Answer

manuals.plus

Jan 19, 2025 - 09:10 PM

To install the HAVIT Lighting 9 in 1 Tivah Up & Down fixture, please follow these steps:

1. Ensure that the electrical circuit is free of voltage by turning off the master switch.
2. Loosen the allen screws on the side of the base and separate the mounting bracket from the fitting.
3. Securely install the backing plate using appropriate screws for your application. Seal all holes in the backing plate, including cable entry and xxxx holes, to prevent water penetration.
4. Connect the cable, making sure to use wire with an earth connection. Connect the earth wire first, followed by the live and neutral wires.
5. Affix the fitting to the mounting bracket and tighten the allen screws to ensure a tight fit and prevent water penetration.
6. Apply silicon seal around the whole base plate to further prevent water from entering the electrical connections.
7. The color temperature and wattage are preset to 3000k and 7w. To change these settings, remove the covers from the fitting by twisting them anti-clockwise. Set the covers aside and remove the globes.
8. Select the desired color temperature and wattage by moving the switches on the side of the globe. Reinsert the globes into the lampholders.
9. Reattach the covers by turning them clockwise, ensuring that the seals are still in place and the caps are tight to prevent water penetration.
10. Carefully inspect all connections before switching the electric circuit back on.

Please note that these instructions are a general guide, and it is important to consult the specific installation instructions provided with your HAVIT Lighting 9 in 1 Tivah Up & Down fixture for any additional details or variations.

For further assistance or clarification, you can contact HAVIT Lighting directly at:
143 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Email: sales@havit.com.au
Website: www.havit.com.au

Please also refer to the warranty terms and conditions provided in the manual for any warranty-related concerns.