User Manual Q&AAnswer
Jan 19, 2025 - 09:09 PM
To assemble the Bebe care CLOUD 3 Tier Change Table, please follow the steps outlined in the user manual:
1. Lay one end panel on its side and place the bottom shelf in position, ensuring it fits into the groove on the headboard. Secure with two 32mm bolts.
2. Repeat the same process for the middle shelf.
3. Attach one top side rail to the end panel using two 32mm bolts and one dowel. Ensure the grooves on the side rail are facing inwards and towards the bottom. Repeat for the remaining top side rail.
4. Carefully lay the changing table down with the shelves standing up. Insert the remaining two dowels into the ends of the top side rails.
5. Slide the top shelf into the grooves on the top shelf rails and into the groove in the end panel.
6. Place the remaining end panel onto the shelves, ensuring each shelf sits in the end panel grooves correctly. Secure it with eight 32mm bolts. Be cautious not to over-tighten the bolts.
7. Attach two footboard side panels to one footboard end panel using four 32mm bolts. Attach the remaining footboard end panel to the other end of the footboard side panels using four 32mm bolts.
8. Carefully lay the changing table down on its top side with the base facing upward. Attach the assembled footboard base to the underside of the changing table using six 32mm bolts.
9. Attach one foot to one of the footboard end panels using three 32mm bolts. Attach the remaining foot to the other footboard end panel using three 32mm bolts.
10. Carefully stand the change table upright and check all bolts for firmness. Be cautious not to over-tighten the bolts.
Please refer to the user manual for any additional information or clarification.
Add New Comment