User Manual Q&AAnswer
Jan 19, 2025 - 08:50 PM
To set up the PAW Patrol: To the Rescue! learning video game, follow these steps:
1. Plug the USB B Connector end of the Micro USB Power Cable into the USB B port on the HDMI Game Stick.
2. Plug the HDMI Game Stick into an HDMI port on your television.
3. Plug the USB A Connector end of the Micro USB Power Cable into a USB port on your television or other qualified DC 5V adapter.
4. Make sure your television is set to display the same HDMI port that the HDMI Game Stick is plugged into.
5. Find the battery cover located on the back of the Wireless Controller, use a screwdriver to loosen the xxxx and then open the battery cover.
6. Remove old batteries by pulling up on one end of each battery.
7. Install 2 new AA (AM-3/LR6) batteries following the diagram inside the battery box.
8. Replace the battery cover and tighten the xxxx to secure.
9. Turn the power switch on the device to On.
Note: It is recommended to install batteries in the Wireless Controller after the HDMI Game Stick has been plugged into the television.
Please refer to the Leap Frog PAW Patrol To The Rescue Instruction Manual for more detailed instructions and safety information.
Add New Comment