How do I install the Curtron PP-C-080-4896 Polar-Pro Flexible Swinging Door for Walk-In Coolers & Freezers? (Curtron PP-C-080-4896 Polar-Pro Swinging Door Owner's Manual)

Answer

manuals.plus

Jan 19, 2025 - 08:36 PM


To install the Curtron PP-C-080-4896 Polar-Pro Flexible Swinging Door, you will need a helper and the included screws and washers. The installation method will depend on the thickness of your door jamb. Here are the three mounting methods explained in the manual:

1. Inside Surface Mount: This method involves attaching the two door panels to the inside wall surface. Measure from the back of the closed door to the inside wall surface. Follow the instructions on page 3 of the manual for detailed mounting instructions.

2. In-Jamb Mount: With this method, the two door panels are attached to the inside of the doorway opening using both door jambs. Make sure the door jamb is strong enough to support the weight and force of the door. Follow the instructions on page 4 of the manual for detailed mounting instructions.

3. Wall/In-Jamb Mount: In this method, the two door panels are placed on the inside of the doorway opening, but the inside wall surface is used for mounting. Again, ensure the door jamb is strong enough. Follow the instructions on page 5 of the manual for detailed mounting instructions.

The manual provides step-by-step instructions with illustrations for each mounting method. It is important to follow the instructions carefully to ensure proper installation. If you have any doubts about the strength of your door jamb or need further assistance, it is recommended to consult with the cooler/freezer manufacturer.