User Manual Q&AAnswer
Jan 19, 2025 - 08:34 PM
To connect the Televes 593100 Series CATV Meter Analyzer with Remote Control to your television system, follow these steps:
1. Connect the RF F-connector of the meter to the RF input of your television system using a coaxial cable.
2. Connect the AC adapter to the power input of the meter and plug it into a power outlet.
3. Turn on the meter by pressing and holding the Device On/Off button for approximately 3 seconds.
4. Use the navigation buttons to select the desired function or measurement you want to perform.
5. Use the OK button to confirm your selection and navigate through the menus.
6. Use the Back button to return to the previous menu or close a parameter entry window.
7. Use the Home button to return to the main menu.
8. Use the Setup button to access the parameter window for the current function.
9. Use the LED indicators to check the status of the meter, such as power on/off, battery charging, and load status.
For more detailed instructions on using the Televes 593100 Series CATV Meter Analyzer with Remote Control, please refer to the user guide provided with the product.
Add New Comment