User Manual Q&AAnswer
Jan 19, 2025 - 08:18 PM
To assemble the Dyson UP32 Ball Animal Upright Vacuum Cleaner, follow these steps:
1. Fit the cleaner head:
- Lie the machine on its back.
- Slide the Motorbar™ cleaner head into position on the front of the ball. Push upwards until the red button on the underside of the machine clicks securely in place.
- Stand the machine upright.
2. Fit the wand:
- Slide the handle onto the machine until it clicks into position.
- Position the wand into the end of the hose. Press the wand release button on the end of the hose and slide the wand all the way down.
- Position the wand and hose in the handle recess on the machine. Slide the wand down into the handle until it clicks into position.
- Close the wand end cap.
3. Fit the tool holder:
- Slide the tool holder into position on the side of the machine.
- Fit the combination tool onto the holder.
- If your machine is supplied with a Tangle-free turbine tool holder, clip it to the front of the handle, just above the power button.
4. Wrap the cable around the top and bottom cable hooks and secure with the cable clip.
For more detailed instructions and illustrations, refer to the user manual provided with the Dyson UP32 Ball Animal Upright Vacuum Cleaner.
Add New Comment