How do I install the TECH EU-T-2.2 Control Heating Room Regulator? (TECH EU-T-2.2 Control Heating Regulator User Manual)

Answer

manuals.plus

Jan 19, 2025 - 08:16 PM

To install the TECH EU-T-2.2 Control Heating Room Regulator, please follow these steps:

1. Ensure that the power supply to the heating device is switched off to avoid the risk of electric shock.
2. Connect the regulator to the heating device using a two-core cable. Make sure to connect the wires correctly to prevent damage to the regulator.
3. Mount the regulator on the wall using the provided screws or adhesive.
4. Once the regulator is securely mounted, press the registration button on the back of the housing to register the regulator with the heating device. The screen will display "REg" during the registration process. If the registration is successful, the screen will display "SUc". If the screen displays "Err", the registration attempt has failed.
5. After registration, you can change the pre-set temperature by pressing the "<" or ">" buttons on the regulator. The pre-set temperature will start flashing, and you can adjust the value using the "<" or ">" buttons.
6. The regulator also has a menu function that can be accessed by pressing and holding the Menu button. In the menu, you can select different operation modes, check the battery level, set the room temperature hysteresis, calibrate the sensor, activate the key lock, and restore factory settings. Use the "<" and ">" buttons to navigate through the menu options and the Menu button to confirm selections.
7. To exit the menu, select the "Ret" option. The screen will flash for 3 seconds and exit the menu.
8. If you need to display the software version number, press and hold the registration button on the back of the housing.

Please note that these instructions are a summary and it is important to refer to the complete user manual for detailed installation and operation instructions.