User Manual Q&AAnswer
Jan 19, 2025 - 08:15 PM
The transmitter and receiver of the ThermoPro TP-810W Wireless Meat Thermometer are usually pre-paired and do not require synchronization. However, if they are no longer paired, you can follow these steps to synchronize them:
1. Insert two AAA batteries into the receiver. The signal icon on the display will flash.
2. Insert two AAA batteries into the transmitter and insert the stainless steel probes into the corresponding plugs in the transmitter. The LCD display will show the current temperatures of each probe.
3. Wait for a few seconds. The transmitter will send the signal to the receiver, and you will see the current temperatures on both the receiver and transmitter displays.
4. Press and hold the RESYNC button for 3 seconds on the receiver to enter the synchronization mode.
5. Wait for a moment until the temperature reading shows on the receiver display. This indicates that the synchronization/pairing process is completed. Your ThermoPro TP-810W Wireless Meat Thermometer is now ready for use.
Note: The synchronization between the transmitter and receiver will not be lost even if you replace the batteries.
For more information and detailed instructions, please refer to the ThermoPro TP-810W Wireless Meat Thermometer Instruction Manual.
Add New Comment