User Manual Q&AAnswer
Jan 19, 2025 - 08:12 PM
To charge the Brennenstuhl HL 500 A LED Rechargeable Hand Lamp, follow these steps:
1. Use a USB cable to connect the lamp's charging port (located on the side of the lamp) to a tested USB power source, such as a charger or computer, with a maximum 5V output voltage.
2. The charging indicator on the lamp will turn red, indicating that the battery is being charged.
3. Allow the lamp to charge for approximately 4 hours. During this time, the battery indicator will remain red.
4. Once the battery is fully charged, the charging indicator will turn green.
Note: It is important to only use a tested USB power source and a USB cable to charge the lamp. Additionally, it is recommended to fully drain the battery and recharge it before using the lamp for the first time. If the lamp is not used for an extended period of time, it is advised to charge the battery every 3 months.
Please refer to the instruction manual for more detailed information and safety precautions regarding the Brennenstuhl HL 500 A LED Rechargeable Hand Lamp.
Add New Comment