User Manual Q&AAnswer
Jan 18, 2025 - 05:53 AM
To thread the needle on the , follow these steps:
1. Pass each needle thread through thread guide "A". If you are using thin slippery thread, pass the thread through thread guide "B" as well.
2. With the take-up lever located at the uppermost position, pass each needle thread in the order shown in the manual.
3. Press the upper thread loosening button to open the saucer of the upper thread tension adjuster, and pull the upper thread out easily.
4. Set the bobbin into the bobbin case and press down the latch.
5. While holding the two needle threads with your left hand, rotate the hand-wheel one turn with your right hand. By pulling up the needle threads, the bobbin threads will be lifted.
6. Make sure each combination of bobbin thread and needle thread is aligned and led backward.
For more detailed instructions and illustrations, please refer to the "Threading of needle threads" section in the instruction manual.
Add New Comment