User Manual Q&AAnswer
Jan 18, 2025 - 05:45 AM
To set the clock on the CDN PT2 Digital Timer, follow these steps:
1. Select CLOCK mode by sliding the mode switch to the appropriate position. After inserting the battery, the display will show "12:0000 AM".
2. Press and hold the ENTER button for approximately 2 seconds until the display starts flashing.
3. Use the HR (hour), MIN (minute), and SEC (second) buttons to enter the desired time. Press and hold a button for fast advance.
4. Press the ENTER button to exit. The timer will automatically exit the clock setting mode after 3 seconds of inactivity.
Note: The timer will retain the set time even when the mode switch is moved to another position.
For more detailed instructions and information, please refer to the CDN PT2 Digital Timer manual.
Add New Comment