User Manual Q&AAnswer
Jan 18, 2025 - 05:39 AM
To set the output voltage range on the NXP WPR1500-HV Wireless Charging Receiver, you can follow these steps:
1. Connect the WPR1500-HV receiver board to a power source within the input voltage range of 3.5 V to 20 V AC peak.
2. Use the FreeMASTER tool to customize and calibrate the receiver board. You can download the FreeMASTER tool from the NXP website.
3. Open the WPR1500_HVOUT.pmp file in the FreeMASTER tool.
4. Click on the "Start/Stop" button in the FreeMASTER GUI to monitor the working status of the receiver board.
5. In the FreeMASTER tool, navigate to the settings related to the output voltage range.
6. Adjust the settings to set the desired output voltage range. The range can be set from 3.5 V to 20 V.
7. Save the settings and disconnect the receiver board from the power source.
8. Reconnect the receiver board to the power source and the output voltage range will be set according to the customized settings.
Please note that these steps are a general guideline and may vary depending on the specific configuration and setup of the WPR1500-HV receiver board. For detailed instructions and specific settings, refer to the NXP WPR1500-HV Wireless Charging Receiver User Guide.
Add New Comment