User Manual Q&AAnswer
Jan 18, 2025 - 05:22 AM
To calibrate the Weighmax W-Dx 100 Pocket Digital Scale, please follow these steps:
1. Activate the Scale: Make sure the scale is powered on and operational.
2. Clear the Scale: Ensure that the weighing platform of the scale is clear of any debris or objects.
3. Access Calibration Mode: The specific buttons or combination of buttons to access the calibration mode may vary depending on the scale model. Please refer to the user manual provided with the scale for instructions on how to activate this mode.
4. Place Calibration Weight: You will need a calibration weight that corresponds to the scale's capacity. For the Weighmax W-Dx 100, which has a 100-gram capacity, use a 100-gram calibration weight.
5. Start Calibration: Follow the guidelines provided in the user manual to begin the calibration process. This typically involves placing the calibration weight on the scale's platform and allowing it to complete the calibration procedure.
6. Calibration Complete: The scale should indicate that the calibration process was successful by displaying a confirmation message or signal. This indicates that adjustments have been made to ensure precise measurements.
7. Remove Calibration Weight: Once the calibration process is complete, remove the calibration weight from the scale.
It is important to note that calibration may need to be performed periodically to maintain the scale's accuracy. Refer to the user manual for any additional instructions or recommendations specific to the Weighmax W-Dx 100 Pocket Digital Scale.
Add New Comment