User Manual Q&AAnswer
Jan 18, 2025 - 05:18 AM
To properly operate the WESCO 053120 StairKing Power Appliance Truck, follow these steps:
1. Before operating the truck, watch the training video and practice going up and down steps without a load. A training video is shipped with each unit.
2. Do not allow anyone other than the operator on the stairway or below the appliance truck while it is in operation.
3. Only experienced personnel should operate the appliance truck.
4. Do not exceed the rated maximum capacity of 850 lbs.
5. Additional personnel may be required to assist in balancing heavy loads. Once the load is balanced, do not allow additional personnel on the stairway or below the appliance truck while it is in operation.
Moving a Load Up Stairs:
- Position the load in the center of the hand truck and secure it with a belt.
- Place the hand truck with the load against the edge of the stair tread, with both guide belts against the edge of the step.
- Stand on the first step and pull the truck so the stair glides rest against the step. Pull the load back towards you. When balanced, push the switch to the "UP" position. The lifting rollers will rotate around and lift the truck wheels up and over the step. Repeat this process for each step climbed.
Moving a Load Down Stairs:
- Position the truck wheels about 2 inches away from the leading edge of the stair.
- Push the switch to the "DOWN" position. The lifting rollers will lift the truck wheels up and over the edge and start down the stairs. The operator must keep the load balanced. Repeat this process for each step descended.
For more detailed instructions and safety information, refer to the WESCO 053120 StairKing Power Appliance Truck Instruction Manual.
Add New Comment