User Manual Q&AAnswer
Jan 18, 2025 - 05:00 AM
To calibrate the Pandigital PANSCN08 HandHeld Wand Scanner, follow these steps:
1. Lay the calibration sheet on a flat surface, with the printed side facing up.
2. Place the scanner on the white area of the calibration sheet.
3. Press and hold both the Scan and PDF JPG buttons for 3 seconds to turn on the scanner and enter calibration mode.
4. When "C01" appears on the LCD and the red LED flashes, slide the scanner down across the white area of the calibration sheet.
5. When the first scan is finished, "C02" will appear on the LCD.
6. Slide the scanner back up over the white area.
7. When the calibration is complete, "777/888" will appear on the LCD, and then the scanner will automatically turn off.
8. Carefully place the calibration sheet back into the plastic sleeve and store it until the next use.
By following these steps, you will calibrate your Pandigital PANSCN08 HandHeld Wand Scanner and ensure accurate scanning results.
Add New Comment