User Manual Q&AAnswer
Jan 18, 2025 - 04:51 AM
Mounting the SUPERDANNY SD12011110 6 Outlet Power Strip on a wall is a convenient option for keeping it securely in place and reducing clutter. Here's how you can mount it:
1. Identify a suitable location: Choose a wall or surface where you want to mount the power strip. Ensure it is easily accessible and away from any potential hazards like water sources.
2. Prepare the power strip: Before mounting, make sure the power strip is unplugged and all devices are disconnected from it.
3. Determine the mounting orientation: The SD12011110 Power Strip is typically designed with keyhole slots or other mounting mechanisms on the back. Decide whether you want to mount it horizontally or vertically based on your preference and available space.
4. Mark the mounting holes: Hold the power strip against the wall in the desired orientation. Use a pencil or marker to mark the locations of the mounting holes on the wall through the keyhole slots or other mounting mechanisms on the back of the power strip.
5. Drill pilot holes: Using an appropriate drill bit, carefully drill pilot holes at the marked locations on the wall. Ensure the size of the pilot holes matches the size of the mounting hardware you will be using.
6. Attach the power strip: Align the mounting holes on the power strip with the pilot holes on the wall. Insert screws or other mounting hardware through the keyhole slots or mounting mechanisms and into the pilot holes. Tighten the screws securely, but avoid over-tightening to prevent damage.
7. Test the mount: Gently tug on the power strip to ensure it is securely mounted and does not come loose.
8. Connect devices: Once the power strip is mounted, plug in your electronic devices into the available outlets as needed.
Please refer to the user manual provided with the SUPERDANNY SD12011110 6 Outlet Power Strip for any specific mounting instructions or guidelines.
Add New Comment