User Manual Q&AAnswer
Jan 18, 2025 - 04:47 AM
To connect the Brother RQL1100 Label Printer to your computer, follow these steps:
1. Ensure that the printer is powered on and ready for use.
2. Locate the USB cable that came with the printer. This cable is used to establish a connection between the printer and your computer.
3. Connect one end of the USB cable to the USB port on the back of the printer.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the cable is securely connected, your computer should recognize the printer and automatically install the necessary drivers.
6. To confirm that the printer is successfully connected, you can check the "Devices and Printers" section in the Control Panel on your computer. The Brother RQL1100 Label Printer should be listed as one of the installed printers.
7. You can now start printing labels directly from your computer using the Brother RQL1100 Label Printer.
For more detailed instructions and troubleshooting tips, please refer to the User's Guide provided with the printer. You can find the User's Guide for the Brother RQL1100 Label Printer in the link provided above.
Add New Comment