User Manual Q&AAnswer
Jan 18, 2025 - 04:37 AM
To install the VAPOTHERM Precision Flow Disposable Patient Circuit into the docking station, follow these steps:
1. Open the door to expose the docking station.
2. Hold the disposable patient circuit by its handle, with the delivery tube downward.
3. Slide the disposable patient circuit downward into the docking station until it stops.
4. Press down firmly to ensure there is no gap between the bottom of the Disposable Water Path and the docking station floor.
5. Close the door.
Note: If the door does not close easily, make sure the cartridge is installed correctly and the disposable water path is fully inserted into the docking station.
Please refer to the VAPOTHERM Precision Flow Disposable Patient Circuit User Manual for more detailed instructions and illustrations.
Add New Comment