User Manual Q&AAnswer
Jan 18, 2025 - 04:31 AM
To connect the Unitech MS282 Handheld Barcode Scanner to your device, please follow these steps:
1. Ensure that your computer is powered on and has an available USB port.
2. Take the USB cable provided with the scanner and locate the USB Type-A connector.
3. Insert the USB Type-A connector into an available USB port on your computer.
4. Take the other end of the USB cable and locate the USB Type-B connector.
5. Insert the USB Type-B connector into the corresponding port on the scanner, which is located on the bottom or back of the device.
6. Once the scanner is connected to your computer, it should be recognized as a new device.
7. Wait for the operating system to install any necessary drivers for the scanner. This process may take a few moments.
8. Once the drivers are installed, the scanner should be ready to use. You can test the scanner by opening a barcode scanning application or software on your computer and scanning a barcode.
Please refer to the user's manual for additional information and troubleshooting steps if you encounter any issues during the setup process.
Add New Comment