User Manual Q&AAnswer
Jan 18, 2025 - 04:30 AM
To install the QAZQA 104572 Modern Standing Outdoor Lamp, please follow the instructions provided in the manual carefully. Here is a step-by-step guide:
1. Before starting the installation, ensure that the electrical supply is switched off. It is recommended to use a switch in the distribution box to turn off the power.
2. The installation of the lamp should be carried out by authorized and qualified technicians in accordance with the valid regulations for electrical installation.
3. Make sure to maintain a safe distance from other objects and provide enough room around the fitting as specified in the manual.
4. Do not install the lamp during rain or in areas where direct contact with water is possible.
5. When connecting wires, pay attention to the symbols provided in the manual. The symbols indicate the neutral, live, and earth connections.
6. Ensure that clamping screws in electrical connections are adequately tightened, especially for 12V low-voltage conductors.
7. If you need to replace a halogen lamp, wait for it to cool down for at least 5 minutes before handling.
8. Clean the lamp with a clean, dry cloth or brush. Do not use solvents or abrasives. Avoid dampness on all electrical components.
9. Take note of the protection class of the lamp. Class I fittings must be earthed, while Class II fittings are double insulated and do not require earthing. Class III fittings are low voltage.
10. The lamp is designed to work with a specific voltage, so ensure that the indicated voltage matches your electrical supply.
11. The luminaire can be used in combination with a dimmer if desired.
12. Refer to the manual for the recommended type of lamp, maximum size, and wattage. Do not exceed these specifications.
13. Dispose of the luminaire properly by bringing it to a staging area for electrical waste. Do not dispose of it with normal domestic waste.
If you have any further questions or concerns, it is recommended to consult a professional, taking into account local installation requirements.
Add New Comment