How do I connect the NUX NAI-5 Optima Air Acoustic Guitar Simulator Pedal to my guitar and amplifier? (NUX NAI-5 Optima Air Guitar Pedal Owner's Manual)

Answer

manuals.plus

Jan 18, 2025 - 04:20 AM


To connect the NUX NAI-5 Optima Air Acoustic Guitar Simulator Pedal to your guitar and amplifier, follow these steps:

1. Connect your guitar to the pedal using a 6.35mm (1/4-inch) mono jack cable. Plug one end of the cable into the INPUT jack of the pedal and the other end into the output jack of your guitar.

2. Connect the pedal to your amplifier or audio interface using a 6.35mm (1/4-inch) mono jack cable. Plug one end of the cable into the OUTPUT jack of the pedal and the other end into the input jack of your amplifier or audio interface.

3. If you want to use external effects pedals, you can connect them to the pedal using the SEND/RETURN effects loop. Connect the SEND jack of the pedal to the input of your external effect pedal, and connect the output of your external effect pedal to the RETURN jack of the pedal.

4. If you want to listen to your playing through headphones, you can connect headphones to the 3.5mm (1/8-inch) headphone input jack of the pedal.

5. If you want to play along with music from an external device, you can connect the device to the pedal using a 3.5mm (1/8-inch) auxiliary cable. Plug one end of the cable into the 3.5mm (1/8-inch) auxiliary input jack of the pedal and the other end into the headphone output or line output of your external device.

6. If you want to connect the pedal directly to a mixer or PA system, you can use the XLR DI output jack. Connect an XLR cable from the XLR DI output jack of the pedal to the input of your mixer or PA system.

Make sure to consult the owner's manual for more detailed instructions and information on the connections and settings of the NUX NAI-5 Optima Air Acoustic Guitar Simulator Pedal.