User Manual Q&AAnswer
Jan 18, 2025 - 04:01 AM
Installation of the Schneider Electric A9E1832 Acti9 Phase Indicating Light is a task that should only be carried out by a qualified electrician. Here are the steps to install the phase indicating light:
1. Ensure that all power supplying the device is turned off before starting the installation.
2. Use a voltage tester with a suitable rated voltage to check that all active conductors are not energized.
3. The phase indicating light can be installed by clipping it onto a DIN rail. The DIN rail is a standard mounting rail used in electrical installations.
4. The light can be installed in any indifferent position.
5. Make sure to comply with all applicable local, regional, and national regulations during the installation process.
6. Do not install the device if it is observed to be damaged upon unpacking.
Please note that the above instructions are a general guideline. For specific installation details and safety precautions, please refer to the Schneider Electric A9E1832 Acti9 Phase Indicating Light Instruction Manual provided by the manufacturer.
Add New Comment