User Manual Q&AAnswer
Jan 18, 2025 - 03:58 AM
To install the Danfoss SonoMeter 40c, please follow the steps below:
1. Ensure that you have the necessary tools and materials for installation, including a screwdriver, mounting bracket, and any required wiring.
2. Choose a suitable location for the SonoMeter 40c. It should be installed on a vertical pipe section, preferably near the flow and return connections of the heating system.
3. Attach the mounting bracket to the pipe using the provided screws. Make sure it is securely fastened.
4. Connect the necessary wiring according to the installation diagram provided in the manual. Ensure that the power supply is turned off before making any electrical connections.
5. Once the wiring is complete, attach the SonoMeter 40c to the mounting bracket. Make sure it is securely attached and properly aligned.
6. Turn on the power supply and check that the device is receiving power.
7. The SonoMeter 40c will self-activate after passing 10L of volume. Once activated, it will start transmitting data wirelessly using the Wireless M-Bus communication type.
8. You can now configure and monitor the SonoMeter 40c using the appropriate software or system.
Please refer to the installation guide provided by Danfoss for more detailed instructions and specific information related to your installation.
Add New Comment