User Manual Q&AAnswer
Jan 18, 2025 - 03:56 AM
To install the VonHaus 3005060 Double Arm Cantilever Tilting TV Bracket on a wooden wall, follow these steps:
1. Use a stud finder to locate wall studs on the wooden wall.
2. Use the Wall Plate on the Bracket (I) to mark the 6 mounting holes (4 at the top and 2 at the bottom) over the wall studs. It is recommended to use a stud finder for accurate stud location.
3. Ensure that there are no hidden wires or pipes behind the marked mounting holes.
4. Use appropriate screws and wall plugs suitable for supporting the TV bracket and the weight of your TV. Refer to the wall mounting guide for suitable wall plug types.
5. Drill pilot holes at the marked mounting hole positions.
6. Attach the Wall Plate (I) to the wooden wall using the screws and wall plugs.
7. Ensure that the wall plugs are well fitted and securely attached to the drilled holes.
8. With the help of another person, hold the TV and loosen the tilt bolt on both Brackets. Tilt the TV to the desired position and secure it by tightening the tilt bolt.
9. The VonHaus 3005060 Double Arm Cantilever Tilting TV Bracket allows for a tilt position of 0° to -14°.
Please note that these instructions are a general guide. It is recommended to refer to the instruction manual provided with the product for detailed installation steps and safety precautions.
Add New Comment