User Manual Q&AAnswer
Jan 18, 2025 - 03:52 AM
Calibrating the REZNOR SF-400 Electronic Weighing Machine Scale is a simple process that can help ensure accurate measurements. Here are the steps to calibrate the scale:
1. Turn on the scale and wait for it to display "0" or "CAL" on the screen.
2. Find a calibration weight that matches the maximum weight capacity of the scale. For example, if the scale has a maximum weight capacity of 10 kilograms (22 pounds), use a 10-kilogram calibration weight.
3. Place the calibration weight on the center of the scale's weighing platform. Make sure the weight is evenly distributed and not touching any other objects.
4. Wait for the scale to stabilize and display the weight of the calibration weight. This may take a few seconds.
5. Press and hold the calibration button (if available) until the display shows a specific code or symbol indicating that calibration is in progress.
6. Release the calibration button and wait for the scale to complete the calibration process. The display may show a code or symbol indicating that calibration is successful.
7. Remove the calibration weight from the scale and check if the display shows "0" or the correct weight when empty.
Note: The specific calibration process may vary depending on the model of the scale. Refer to the user manual for detailed instructions on how to calibrate your specific model.
By following these steps, you can calibrate the REZNOR SF-400 Electronic Weighing Machine Scale and ensure accurate measurements for your cooking and weighing needs.
Add New Comment