User Manual Q&AAnswer
Jan 18, 2025 - 03:41 AM
Mounting Instructions:
1. Select a suitable location for mounting the sensor. It should be mounted in an area representative of the environment to be monitored.
2. Ensure that the mounting surface is clean and free from any obstructions.
3. Use the provided screws or adhesive tape to securely attach the sensor to the mounting surface. Make sure it is mounted horizontally and level.
Connecting Terminals:
1. The QFA3150 sensor has three terminals: V+, GND, and OUT.
2. Connect the V+ terminal to the positive (+) terminal of the power supply.
3. Connect the GND terminal to the negative (-) terminal of the power supply.
4. Connect the OUT terminal to the input of the desired device or controller.
Dimensions:
The dimensions of the QFA3150 sensor can be found in the product manual. Please refer to the manual for detailed information on the physical dimensions of the sensor.
Open Source Software (OSS):
For information about the open-source software components used in the QFA3150 sensor, including their copyright holders and license conditions, please visit the website http://www.siemens.com/download?A6V11.... This website provides the necessary information regarding the open-source software used in the product.
Please note that the information provided here is a general overview. For specific instructions and details, it is recommended to refer to the SIEMENS QFA3150 Humidity and Temperature Sensor Instruction Manual.
Add New Comment