User Manual Q&AAnswer
Jan 18, 2025 - 03:38 AM
To set the time and date on your SEIKO V192 Chronograph Analog Solar Black Dial Watch, please follow these steps:
1. Make sure the watch is working and the small seconds hand is moving every second. If it is moving every two seconds or has stopped, expose the dial to light to charge the watch.
2. Pull out the crown to the first click. The small seconds hand will continue to move. For models with a xxxx -down crown, please unlock the crown before operating it.
3. Turn the crown to set the date. Turn it until the previous day's date appears. For example, to display the date as "6," set it to "5." Turn the crown to the right (clockwise) to set the date.
4. Pull out the crown to the second click and set the time. Pull out the crown when the small seconds hand has reached the 0 seconds position (the small seconds hand will stop moving). Turn the crown to advance the hands until the date changes to the next day. The time is now set for the AM period. Advance the hands to set the correct time.
5. Use the 24-hour hand to check whether the displayed time is AM or PM.
6. In order to set the time accurately, turn the minute hand 4 to 5 minutes ahead and then return it to the correct time.
7. Push the crown back in to the normal position in accordance with a time signal. The small seconds hand will start moving.
Please note that these instructions are based on the SEIKO V192 Chronograph Analog Solar Black Dial Watch manual. If you have any further questions or need assistance, it is recommended to contact the retailer from whom you purchased the watch or SEIKO CUSTOMER SERVICE CENTER.
Add New Comment