User Manual Q&AAnswer
Jan 18, 2025 - 03:37 AM
Sure! Here are the step-by-step instructions for setting up the iOptron ST-80 Digital Microscope:
1. Setting the monocular:
- Loosen the fastening xxxx and twist the monocular attachment to the desired position.
- Retighten the fastening xxxx .
2. Setting the objective:
- Rotate the revolving nosepiece to select the desired objective (e.g., 4x).
3. Setting the mechanical stage:
- Raise the stage with the focusing xxxx until it cannot go any further.
4. Setting the illumination unit:
- Spin the illumination wheel to the lowest setting.
5. Connecting the power:
- Connect the power adapter to the microscope before plugging it into the wall outlet.
Setting up the Electronic Eyepiece:
1. Removing the eyepiece:
- Remove the original eyepiece and eyepiece attachment tube from the monocular.
- Insert the electronic eyepiece into the monocular tube.
2. Connecting the electronic eyepiece to the computer:
- Connect the electronic eyepiece to the computer via the USB cable.
These are the basic steps for setting up the iOptron ST-80 Digital Microscope. For more detailed instructions and information on using the microscope, please refer to the user guide provided with the product.
Add New Comment