How do I connect the LIMENTE LED-SLIM lamp to the Limente-driver? (LIMENTE LED-SLIM Instruction Manual)

Answer

manuals.plus

Jan 18, 2025 - 03:33 AM


To connect the LIMENTE LED-SLIM lamp to the Limente-driver, please follow these steps:

1. Ensure that the power is turned off before starting the installation process.

2. Identify the suitable Limente-driver for your LED-SLIM lamp. It is important to use the correct type of driver to avoid any damage and ensure the warranty remains valid.

3. Once you have the suitable Limente-driver, locate the connection points on both the lamp and the driver. The specific location may vary depending on the model, so refer to the manual or product documentation for guidance.

4. Connect the wires from the Limente-driver to the corresponding connection points on the LED-SLIM lamp. Make sure to match the positive (+) and negative (-) terminals correctly.

5. Double-check all connections to ensure they are secure and properly aligned.

6. After the connections are made, you can proceed with the installation of the lamp. Follow the instructions provided in the manual for the specific installation method you are using.

7. Once the lamp is securely installed, you can turn on the power and test the functionality of the LED-SLIM lamp.

Remember, it is essential to have the installation performed by a competent person who follows the valid rules and regulations. If you have any doubts or concerns, it is recommended to consult a professional electrician for assistance.