User Manual Q&AAnswer
Jan 18, 2025 - 03:17 AM
To reverse the door on your oceanic OCEAFC244W refrigerator, please follow these steps:
1. Close the door.
2. Take off the door hinge cover by unscrewing the flange screws and removing the door hinge.
3. Take off the upper door.
4. Unscrew the xxxx and remove the stop block. Unscrew the xxxx and take off the middle hinge.
5. Take off the bottom door.
6. Unscrew the xxxx and remove the stop block.
7. Take off the short adjustable feet, and then remove the flange screws. Take off the bottom hinge, and then remove the high adjustable feet.
8. Take off the screws and remove the door hinge hole caps.
9. Install the bottom hinge with the flange screws. Install the short adjustable feet and high adjustable feet. Put the stop block with xxxx on the door.
10. Install the bottom door.
11. Install the middle hinge, and then install the stop block with screws.
12. Install the upper door.
13. Install the upper door hinge with the flange screws. Place the door hinge cover on the door hinge, and then install the door hinge hole caps.
14. Install the screws.
Please note that these instructions are based on the information provided in the oceanic OCEAFC244W refrigerator instruction manual. It is important to follow the instructions carefully to ensure proper installation of the reversed door.
Add New Comment