User Manual Q&AAnswer
Jan 18, 2025 - 03:16 AM
To assemble the VonHaus 3005078 Curved Clear Glass Monitor and Laptop Stand, please follow these steps:
1. Ensure you have all the pieces listed in the manual. If you are missing any components, contact the customer services department at support@domu.co.uk. Do not proceed with assembly if any components are missing.
2. Place the curved glass panel on a flat surface with the curved side facing upwards.
3. Attach the two metal support brackets to the underside of the glass panel. Line up the holes on the brackets with the holes on the glass panel and secure them using the provided screws. Make sure the brackets are evenly spaced and centered.
4. Once the brackets are securely attached, place the stand on a stable surface and position it at the desired location.
5. Carefully lift your monitor or laptop and place it on the stand, ensuring it is centered and balanced.
6. Once your device is in place, double-check that all fittings are tightened securely. Re-tighten all fittings after the first week following assembly.
Please note that the maximum weight capacity of the stand is 30kg/66lb. Do not exceed this weight limit to ensure the stability and safety of your device.
If you encounter any difficulties during assembly or require further support, you can contact the customer service team at support@domu.co.uk. They will be happy to assist you.
Remember to retain a proof of purchase receipt or statement as proof of the purchase date, as it may be required for warranty purposes.
Add New Comment