User Manual Q&AAnswer
Jan 18, 2025 - 03:14 AM
To install and set up the remote control for the FGF8218110VFG 65 in. Integrated LED Indoor Brushed Nickel Ceiling Fan Light, please follow the steps outlined in the user guide provided with the product. Here is a step-by-step guide:
1. Start by ensuring that the fan is turned off and the power supply is disconnected.
2. Locate the receiver unit inside the fan's canopy. It is a small rectangular box that receives signals from the remote control.
3. Remove the battery cover on the back of the remote control and insert the included batteries, making sure to match the polarity (+/-) correctly.
4. Turn on the power supply to the fan.
5. Within 30 seconds of restoring power, press and hold the "Fan" button on the remote control for approximately 3 seconds. This will activate the pairing mode.
6. While the pairing mode is active, press and release the "Learn" button on the receiver unit inside the fan's canopy. The receiver's LED indicator will start flashing.
7. Within 30 seconds of pressing the "Learn" button, press and release any button on the remote control to pair it with the receiver. The receiver's LED indicator will stop flashing, indicating successful pairing.
8. Test the remote control by operating the fan's speed, light, and other functions.
Note: If the pairing process fails, repeat steps 5 to 7 within 30 seconds. If the issue persists, refer to the troubleshooting section of the user guide or contact customer support for further assistance.
For more detailed instructions and diagrams, please refer to the user guide provided with the FGF8218110VFG 65 in. Integrated LED Indoor Brushed Nickel Ceiling Fan Light Remote Control.
Add New Comment