User Manual Q&AAnswer
Jan 18, 2025 - 03:18 AM
To connect the UNITECH MS846 Imager Handheld Barcode Scanner to your computer, follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB cable that came with the scanner. This cable is used for establishing the connection.
3. Connect one end of the USB cable to the USB port on the scanner itself.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Wait for your computer to recognize the scanner. It may take a few moments for the drivers to install automatically.
6. Once the scanner is recognized, it should be ready for use. You can now start scanning barcodes using the UNITECH MS846 Imager Handheld Barcode Scanner.
For more detailed instructions and troubleshooting tips, please refer to the User's Manual provided with the scanner. The manual contains step-by-step instructions along with illustrations to help you with the setup process.
Add New Comment