User Manual Q&AAnswer
Jan 18, 2025 - 03:11 AM
To adjust the position of the Deviant Race Parts 45902 Billet Mirror, follow these steps:
1. Loosen the three 4MM screws on the mirror back cap.
2. Adjust the mirror to your desired position.
3. Tighten the two screws closest to the roll bar clamp evenly.
4. The xxxx furthest away from the roll bar clamp should press the back cap against the mirror.
5. Once the mirror is adjusted to the desired position, tighten the two screws closest to the roll bar clamp.
Please refer to the installation guide for visual references and additional information on the installation process.
Add New Comment