User Manual Q&AAnswer
Jan 18, 2025 - 03:09 AM
To install the KINGSTON KS4102CKL Pot Filler in Polished Brass, follow these steps:
1. Flush plumbing lines to clear any debris.
2. Shut off both supply lines after flushing.
3. Shut off hot and cold water supply under the sink. Plug the sink drain with a cloth to avoid losing small parts. Remove the old faucet.
4. Turn on the old faucet to remove any excess water in the supply lines. Apply Teflon tape onto the threads of the supply elbow.
5. Insert the mounting plate into the faucet body and install it to the water outlet on the wall.
6. Place the mounting plate in the center of the pencil outline you just made and mark the location of the mounting screws.
7. Drill holes at the marked locations and remove the mounting plate from the faucet body.
8. Insert anchors into the holes with a hammer until flush with the wall.
9. xxxx the mounting plate to the wall with the mounting screws.
10. Insert the flange into the faucet body and install it to the water outlet on the wall, then turn it tightly in a clockwise direction. Make sure the faucet is horizontal.
11. Tighten the set xxxx with the Allen wrench, then cover the mounting plate with the flange.
12. Install the handles with the screws and replace the covers.
13. Remove the aerator and turn on both hot and cold valves, letting the water run for at least one minute. This will clear any debris left in the line. Reinstall the aerator.
For more detailed instructions and diagrams, please refer to the KINGSTON KS4102CKL Pot Filler in Polished Brass Installation Guide provided with the product.
Add New Comment