User Manual Q&AAnswer
Jan 18, 2025 - 03:07 AM
To mount and operate the rabalux A05 Band Light fitting, please follow these instructions:
1. Before starting any work, ensure that the circuit supplying power to the light fitting is turned off. You can do this by switching off the circuit breaker securing the circuit or, if you're unsure, switch off the circuit breaker of the consumption meter.
2. It is important to have a qualified electrician mount and put the light fitting into operation. The producer does not take responsibility for any damages or accidents resulting from non-standard connection and usage.
3. The rabalux A05 Band Light fitting is designed for indoor use only.
4. When mounting the light fitting, refer to the attached drawing provided with the product. Take care not to damage any electric cables during the installation process.
5. The wire color codes are as follows: black or brown (L) for the phase conductor, blue (N) for the neutral conductor, and green-yellow for the protecting conductor (in the case of a light fitting of shock protection class I).
6. The light fitting is compatible with a specific type and maximum performance of light source indicated on the data plate and around the socket. Only use a light source that meets these specifications.
7. Avoid cleaning the light fitting with detergents or abrasive materials, and prevent liquids from coming into contact with electrical parts.
8. Properly dispose of the light source when it reaches the end of its life. Do not dispose of it in household waste. Contact your community or township for appropriate environmentally-friendly waste disposal methods. Remember that light sources are considered hazardous waste and should be disposed of separately from household waste at designated collection points.
Please refer to the rabalux A05 Band Light Instruction Manual for more detailed instructions and safety information.
Add New Comment