User Manual Q&AAnswer
Jan 18, 2025 - 03:05 AM
The support block is designed to assist in engraving large flat objects. It consists of a rotating ball that can be adjusted as needed. Typically, two support blocks are placed on the front and back of the engraving area to work in conjunction with the R3 rotating roller.
To use the support block, follow these steps:
1. Determine the size and shape of the object you want to engrave.
2. Adjust the position of the support block according to the size of the object. The support block can be placed at any suitable location.
3. Ensure that the R3 rotating roller is properly aligned with the support block.
4. Slide the object onto the engraving area, making sure it rests on the support block and can move back and forth smoothly.
5. Start the engraving process, ensuring that the laser engraver is supervised at all times to prevent any accidents or damage.
Please note that when using the R3 rotating roller and support block together, there may be slight deviations in the engraved object. Additionally, due to the high energy of the laser during processing, there is a risk of fire. Therefore, it is important to closely monitor the engraving machine during operation to prevent any potential loss or damage.
If you have any further questions or require technical support, you can visit the official website of ATOMSTACK or contact their customer service via email at support@atomstack3d.com.
Add New Comment