User Manual Q&AAnswer
Jan 18, 2025 - 03:03 AM
Installation of the Danfoss AB-QM DN 10-32 Pressure Independent Balancing valve involves several steps. Here is a step-by-step guide:
1. Shut off the system: Before starting the installation, make sure to shut off the system and drain any remaining water.
2. Setting the valve: Set the desired flow rate by adjusting the valve's flow setting. This can be done by turning the flow setting ring clockwise or counterclockwise.
3. Locking the valve: Once the desired flow rate is set, lock the valve by tightening the lock nut. This will prevent any accidental adjustment of the flow setting.
4. Measuring the flow rate: After installation, it is important to measure the actual flow rate to ensure it matches the desired flow rate. This can be done using a flow meter or other measuring devices.
Please note that the provided table in the manual gives the flow rates for different percentages of the valve's opening. Use this table as a reference to set the desired flow rate.
For more detailed instructions and illustrations, please refer to the Danfoss AB-QM DN 10-32 Pressure Independent Balancing Installation Guide provided with the product.
Add New Comment