User Manual Q&AAnswer
Jan 18, 2025 - 02:51 AM
Cleaning the filters in your IKEA SBE8596Z0E DISKAD PROFFSIG Integrated Dishwasher is an important maintenance task that can help improve the dishwasher's performance. Here are the steps to clean the filters:
1. Turn off the dishwasher and unplug it from the power supply for safety.
2. Open the dishwasher door and locate the filters at the bottom of the dishwasher tub.
3. Remove the lower filter by turning the handle counterclockwise and lifting it out.
4. Rinse the lower filter under running water to remove any food particles or debris. Use a soft brush or sponge to gently scrub away stubborn residue if needed.
5. Lift the fine filter out of the dishwasher tub by pulling up on the handle.
6. Rinse the fine filter under running water and use a soft brush or sponge to clean it thoroughly.
7. Check the coarse filter, located beneath the fine filter, for any large debris or food particles. Remove any visible debris by hand or with a soft brush.
8. Once all the filters are clean, reassemble them in the reverse order. Place the fine filter back into the dishwasher tub, followed by the coarse filter. Secure the lower filter by turning the handle clockwise until it locks into place.
9. Close the dishwasher door and plug it back into the power supply.
10. Run a test cycle to ensure that the filters are properly installed and the dishwasher is functioning correctly.
Regularly cleaning the filters in your dishwasher will help maintain its performance and prevent clogs that can affect the cleaning results. It is recommended to clean the filters every 1-2 months or as needed, depending on the level of usage and the amount of food debris in your dishes.
Add New Comment