User Manual Q&AAnswer
Jan 18, 2025 - 02:47 AM
To change the IP address of the AIDA HD-NDI-CUBE HX POV Camera, you can use either the USB tool or the web interface.
Using the USB tool:
1. Download the USB tool from the AIDA Imaging website.
2. Connect the camera to your computer using a USB cable.
3. Open the USB tool software.
4. The camera should automatically populate in the software. If not, try using a different USB cable or port.
5. Click on the "Setting" button in the software to open the camera's IP settings.
6. In the IP settings, you can choose between DHCP or Manual settings.
7. If using Manual settings, you can change the IP address, subnet mask, default gateway, DNS, and MAC address.
8. After making the desired changes, click "Save" and disconnect the camera from the computer.
9. Wait a few seconds and reconnect the camera to the computer to apply the new settings.
Using the web interface:
1. Open a web browser and enter the camera's default IP address (192.168.1.188) in the address bar.
2. If prompted, enter the default username and password (both "admin").
3. Once logged in, you will see the real-time preview of the camera.
4. Click on the "Settings" tab to access the camera's settings menu.
5. Under the "Ethernet" tab, you can change the IP settings of the camera.
6. It is recommended to only change settings you are familiar with to avoid potential damage.
7. After making the changes, click "Save" and the camera will restart with the new IP settings.
Please note that any changes made to the IP settings will require a restart of the camera to apply.
Add New Comment