User Manual Q&AAnswer
Jan 18, 2025 - 02:41 AM
Loading the hard roll towels into the Kimberly-Clark 48857 Hard Roll Towel Dispenser is a simple process. Here are the step-by-step instructions:
1. Open the dispenser using the provided key or unlocking mechanism. This will allow you to access the inside of the dispenser.
2. Take the hard roll towels and locate the core of the roll. The core is the cardboard tube in the center of the roll.
3. Insert the core of the roll into the dispenser, making sure it fits securely onto the dispenser's spindle. The spindle is the rod that runs through the center of the roll.
4. Once the core is securely in place, start pulling the paper towel from the center of the roll and thread it through the dispenser's opening. Make sure the paper towel is properly threaded through any guides or slots provided in the dispenser.
5. Continue pulling the paper towel until you have enough length hanging down from the dispenser for users to easily grab and pull.
6. Close the dispenser securely, ensuring that the paper towel is not trapped or pinched in any way.
Now, the hard roll towels are loaded and ready for use in the Kimberly-Clark 48857 Hard Roll Towel Dispenser. Users can access the towels by pulling down on the designated dispensing area.
Add New Comment