User Manual Q&AAnswer
Jan 18, 2025 - 01:04 AM
To assemble the cangaroo XN-J203 Breast Pump, please follow these steps:
Step 1: With clean hands, put the silicone valve (part 6) on the pump body (part 4).
Step 2: Attach the pump body to the milk bottle.
Step 3: Attach the silicone diaphragm with the stem of the handle to the suction adjustable lever.
Step 4: Attach the silicone diaphragm with the stem of the handle on the upper part of the body of the pump, by gently pushing its inner end with fingers as far as possible and make sure that it fits perfectly to all sides of the funnel of the pump body.
Step 5: Fix the handle on the pump to the axle and attach it to the intended position on the pump body. Push carefully until you hear a clicking sound indicating that the handle is fixed.
Step 6: Attach the silicone massage pad to the pump body by gently pushing its inner end as far as possible and make sure that it fits perfectly to all sides of the funnel of the pump body. When you are not using the pump, put the dust cap on.
Please refer to the user manual for visual illustrations and further instructions on assembly.
Note: It is important to clean and sterilize all parts of the breast pump before assembly.
Add New Comment