User Manual Q&AAnswer
Jan 18, 2025 - 12:39 AM
To calibrate the Adam LPB 423e Luna Precision Balance, follow the steps outlined in the operating manual. Here is a general guide to the calibration process:
1. Ensure that the balance is placed on a stable and level surface, away from any drafts or vibrations.
2. Power on the balance and allow it to warm up for the recommended time, as specified in the manual.
3. Press the "Menu" or "Calibrate" button on the balance to enter the calibration mode.
4. The balance will prompt you to place a known weight on the weighing pan. Use a calibrated weight that matches the desired calibration value.
5. Carefully place the known weight on the center of the weighing pan and wait for the balance to stabilize and display the weight reading.
6. Once the balance has stabilized, press the "Enter" or "Calibrate" button to confirm the calibration.
7. The balance will then perform internal calculations and adjust its internal settings based on the known weight.
8. After the calibration process is complete, the balance should display a confirmation message or indicator.
9. It is recommended to perform calibration checks periodically or whenever there are significant changes in the operating conditions or weighing requirements.
Please refer to the operating manual provided for your specific model of the Adam LPB 423e Luna Precision Balance for detailed instructions and any additional steps or considerations.
Add New Comment