User Manual Q&AAnswer
Jan 18, 2025 - 12:38 AM
To calibrate the Adam GBK 70a Bench Check Weighing Scale, follow the steps outlined in the user manual. Here is a general guide to the calibration process:
1. Ensure that the scale is placed on a stable and level surface.
2. Power on the scale and allow it to stabilize for a few minutes.
3. Press the "Menu" button on the scale to enter the menu settings.
4. Use the arrow keys to navigate to the "Calibration" option and press the "Enter" button.
5. Select the calibration type based on your needs, such as single-point or multi-point calibration.
6. Follow the on-screen prompts to place the calibration weights on the scale's platform.
7. Once the weights are in place, press the "Enter" button to initiate the calibration process.
8. The scale will perform the calibration and display the calibration results.
9. Verify that the calibration results are within the acceptable range specified in the user manual.
10. If the calibration is successful, press the "Enter" button to save the calibration settings.
11. Exit the calibration menu and the scale is now calibrated and ready for use.
Please note that the specific calibration procedure may vary depending on the model and firmware version of the GBK 70a scale. For detailed instructions and illustrations, refer to the user manual provided with the product.
Add New Comment