User Manual Q&AAnswer
Jan 18, 2025 - 12:28 AM
To connect the Arkscan 2054N-BT Mini Shipping Label Printer to your device using Bluetooth, please follow these steps:
1. Ensure that the printer is powered on and in Bluetooth pairing mode. You can activate the Bluetooth pairing mode by pressing and holding the Bluetooth button on the printer until the Bluetooth LED indicator starts flashing.
2. On your device, navigate to the Bluetooth settings. This can usually be found in the settings menu or the control panel, depending on your device's operating system.
3. Make sure that Bluetooth is enabled on your device. If it is already enabled, try disabling and re-enabling it to refresh the Bluetooth connections.
4. In the Bluetooth settings on your device, search for available devices. The Arkscan 2054N-BT printer should appear in the list of available devices. It may be listed as "Arkscan 2054N-BT" or a similar name.
5. Select the Arkscan 2054N-BT printer from the list of available devices on your device. Follow any on-screen prompts or instructions to complete the pairing process.
6. Once the pairing process is complete, your device should be successfully connected to the Arkscan 2054N-BT printer via Bluetooth. You can now use compatible software on your device to initiate label printing.
If the Arkscan 2054N-BT printer is not showing up as an available device on your device's Bluetooth settings, there are a few possible reasons for this issue:
- Ensure that the printer is in Bluetooth pairing mode. Press and hold the Bluetooth button on the printer until the Bluetooth LED indicator starts flashing.
- Make sure that the printer is within range of your device. Bluetooth connections typically have a limited range, so ensure that the printer and your device are within close proximity to each other.
- Check if there are any other devices nearby that may be interfering with the Bluetooth connection. Other Bluetooth devices in the vicinity can sometimes cause interference. Try moving the printer and your device away from other Bluetooth devices to see if that resolves the issue.
- Restart both the printer and your device. Sometimes, a simple restart can help resolve connectivity issues.
If you have followed these steps and are still experiencing difficulties connecting the to your device via Bluetooth, please refer to the troubleshooting section of the user manual or contact Arkscan customer support for further assistance.
Add New Comment