User Manual Q&AAnswer
Jan 18, 2025 - 12:01 AM
To switch between the PI Thermo Mode and Manual Mode on the Wallas PI Thermo Control Panel GB Series Heaters, follow these steps:
1. Rotate the Temperature/Power xxxx back and forth quickly from the minimum setting to the maximum setting and back to the minimum setting.
2. When the PI Thermo Mode is selected, the orange thermostat light will be on. In Manual Mode, the light will be off.
3. In the PI Thermo Mode, set the desired target temperature by rotating the Temperature/Power xxxx to the corresponding temperature on the temperature chart provided in the manual.
4. In Manual Mode, control the heating power by rotating the Temperature/Power xxxx to the desired level.
Please refer to the Wallas PI Thermo Control Panel GB Series Heaters User Guide for more detailed instructions and information on the different modes and settings.
Add New Comment