How do I connect the Ricoh IS760 Image Scanner to my computer? (RICOH Image Scanner Operating Instructions)

Answer

manuals.plus

Jan 18, 2025 - 12:00 AM


To connect the Ricoh IS760 Image Scanner to your computer, please follow these steps:

1. Ensure that your computer is powered on and running the appropriate operating system compatible with the scanner.

2. Locate the USB or Ethernet port on the back of the scanner. The specific port may vary depending on the model.

3. If you are using a USB connection:
   a. Connect one end of the USB cable to the USB port on the scanner.
   b. Connect the other end of the USB cable to an available USB port on your computer.

4. If you are using an Ethernet connection:
   a. Connect one end of an Ethernet cable to the Ethernet port on the scanner.
   b. Connect the other end of the Ethernet cable to an available Ethernet port on your computer or network.

5. Once the physical connection is established, power on the scanner by pressing the power button located on the control panel or the scanner itself.

6. Wait for your computer to recognize the scanner. It may take a few moments for the necessary drivers to install.

7. Once the scanner is recognized by your computer, you can proceed to install any additional software or drivers that may be required. Refer to the operating instructions or the included software installation guide for detailed instructions on installing the necessary software.

8. After the software installation is complete, you should be able to use the scanner with your computer. Open the scanning software or application on your computer and follow the instructions provided to begin scanning documents.

Note: For more detailed information on connecting the Ricoh IS760 Image Scanner to your specific computer and operating system, please refer to the "Operating Instructions" manual provided with the scanner. The manual contains step-by-step instructions and illustrations to guide you through the setup process.